one wristband
plenty of opportunities
+372 6682-802
  • Рус
  • Esp
  • In ACS integrated

    Electronic lock PassTech PT200

    Model PassTech PT200

    Electronic locks PassTech PT200 are designed for use in locker rooms of gyms, fitness clubs, health centers, in country clubs, hotels, hotels, resorts.

    PassTech PT200 is designed for installation on locker doors, safe deposit boxes and cabinets. The surface-mounted locks can be easily installed on doors of various materials (metal, wood, plywood, particle board etc.).

    PassTech PT200 has a wireless module to control it remotely from theadministration computer.

    To save battery and prolong operation, the lock goes into the sleep mode. To “wake up” the lock, just touch the front panel, and then enter the four-digit code to open it. After 10 seconds of inactivity, the lock goes back to sleep mode.

    Different modes for different tasks

    Link a number

    The mode “Link a number” is similar to the operation of conventional mechanical locks. To each lock is suitable only one electronic key (or several keys, if required).

    Link a code

    In this mode you can set a code to open the lock. It is possible to make a required number of electronic keys that allow you opening the lock by simply touching to the lock housing.

    Free locker

    The visitor gets a key without a number. Then he chooses any free locker in the locker room. The locker “remembers” the key and can`t be opened with other one. When opening, the locker “forgets” this key and becomes free again.

    Free code

    Set the code to close the lock. By entering a four-digit code the lock is closed and can be opened with the code that you entered. When you re-enter the code, the lock opens and “forgets” this code. Then you can set a new code and close the lock again.

    It is possible to set the automatic opening of the locks at the programmed time.

    Electronic lock PassTech PT200 in ACS

    The electronic PassTech ZP100 lock is compatible with other RFID-systems. For example, only one electronic card / wristband is used as a key to the lock, as a pass to the turnstile, as an electronic guest card and also as a payment tool.

    Information Terminal

    For the mode “Free locker” we developed an information terminal. The device shows to the guest his locker number when placing the RFID-wristband.

    PassTech software

    The PassTech software programs and controls the operation of the electronic locks.

    Wireless access

    A remotely work with locks via the wireless online system PassTech based on the WiFi protocol is possible. You just need the PassTech software package.

    Security of PassTech electronic locks

    Electronic locks PassTech don`t have external mechanical parts such as a keyhole and it makes them resistant to burglary.

    Each key is programmed with a unique security code according to the 3DES algorithm.

    If the key is lost or stolen, there is no need to change the lock. The lock is enough to reprogram. For this, the lock does not even need to be removed from the cabinet door.

    PassTech locks are fully autonomous

    The lock works from 4 AA batteries. Thanks to patented energy-saving technology PassTech locks operate up to 3-5 years, depending on the frequency of use.

    When the lock is not used, it “falls asleep” and goes into a low power mode. The electronic lock “wakes up” from the touch of the key.

    When the battery is discharged, the lock generates a light and a sound signal. In addition to it, information about the battery charge is transmitted via an electronic key to the software package.

    Batteries are not included in the lock price. However, we can offer you high-quality batteries, well-proven in operation with electronic locks, at wholesale prices.

    Designed for harsh environments

    The mechanism of the electronic PassTech lock is placed in the impact-resistance polycarbonate case. Fastening screws are made by injection molding, which ensures their high strength.

    The locks remain functional at temperatures: from -10 to +60 Cº.

    PassTech PT200 Specifications

    Installation method: Surface-mounted
    Front part of the lock: width 53,4 mm, length 68,58 mm, thickness 18,1 mm.
    Inner part of the lock: width 98.94 mm, length 70 mm, thickness 34.98 mm.
    Color: black
    Power: 4 AA batteries
    Operating term from one set of batteries: 3-5 years
    Operating frequency: 13.56MHz
    Supported protocols: ISO14443 Type A/B, Felica, Mifare Classic / Ultralight / DESfire
    Operation with NCF: Yes
    Housing material: polycarbonate
    Temperature range: from +10 to +60ºC

    In access control system integrated

    Order


    Pocketkey